Car Tune-up | Mechanic | Denton TX

Car repairs can be quite expensive, so it’s important to follow the maintenance schedule of your vehicle to keep it in perfect condition and save yourself from handing out wads of bucks in repair bills. While there are so many things in a vehicle that need tune-up, we will only be talking about 10 car tune-up pointers for timely upkeep:

Ignition System

The first thing you should know about your vehicle tune-up is the ignition system that works in parallel with the fuel management system to optimize your car’s performance. A typical tune-up for this system would entail a swap of the spark-plugs that is highlighted as a suggested preventative maintenance action after a defined mileage limit is reached. For vehicle owners who have a coil over plug’ ignition unit, the mechanic at the auto shop will need to replace the spark-plug and take a good look at the coils covering each plug including the coil insulation boot.

Extended Ignition Unit

This is made up of different parts like computer, coils, plug wires, individual sensors, spark plugs and a battery. An ignition system error is indicated by Check Engine sign that you need to hit an auto shop for a fix. Remember that a regular tune-up is a general preventive maintenance procedure that requires no diagnosis for faults as compared to ignition system repair. Check with the mechanic for a defined schedule to tune-up the extended ignition unit.

Fuel System

This is comprised of different sensors, air cleaner, throttle body, intake manifold, injectors, fuel regulator, computer, fuel pump, and fuel filter. The fuel mixed in air is timely channeled by the fuel system to each cylinder of your vehicle to allow the ignition system to initiate the ignition. The typical tune-up is the replacement of dirty fuel filters and the fuel to keep liquid concentrations at optimum level, which should be done as per suggested maintenance schedules.

Check Engine Light

The check engine light blinks when there is a flaw or fault code detected in the ignition or fuel system by the sensors. A factory defined diagnostic process is available for each type of fault code in addition to the respective preventive or corrective action. It’s suggested that you get the check engine light problem examined by a pro. In a regular tuneup, it’s better to get everything checked related to engine even if the car’s running smooth.

Computers Network

New vehicles these days come equipped with two to three individual operational controllers or computers that require troubleshooting in case of an issue. A tune-up procedure for your car would require an inspection of the Power Control Module (PCM) or Electronic Control Module (ECM) that is the computer regulating the functioning of the fuel and ignition system. A tune-up may include getting factory recalls or factory service bulletins to diagnose PCM error of any magnitude.

Diagnostic Procedures or Troubleshooting

A factory defined procedure or troubleshooting phase is an essential part of a tune-up that allows proper fault identification. A good auto shop provides computer codes scanning service to detect faults in the vehicle and then employs a troubleshooting procedure entailing diagnostic tests of the fuel and ignition systems to recommend appropriate corrective procedures.

Tune-Up Schedule

A vehicle’s operational manual specifies the recommended timings for the tune-ups and upkeep repairs with mileage ranges and durations defined. You can always consult a good mechanic for appropriate maintenance schedules, so you have a lucid understanding of when your next tune-up is due. Keep in mind that regular tuning times suggested by an auto shop can be different from factory suggested preventive maintenance schedules.

Tune-Up Components

A good auto shop makes use of reliable auto parts during a tune-up using OEM or original manufacturer parts. A factory recall may be required if an issue published in the factory service bulletins becomes serious. This usually happens because many parts get upgraded after a vehicle’s assembly. It is suggested that you consult the auto shop for appropriate part brands before the tune-up.

Oil Additives & Aftermarket Fuel Treatment Process

There are some oil replacement places that make use of oil additives and customized aftermarket fuel treatment procedures as part of a tune-up. Always ask your auto shop to follow the factory defined maintenance procedures and diagnostics for fault identification and repairs. Vehicles of modern times that are well kept do not require any additives during oil swap routines nor any tailored fuel treatment methods to enhance car performance.

Use Of High Octane

A tune-up discussion may include questions on the use of high octane for better fuel consumption. Automakers do not usually define a specific premium unleaded fuel type, so ask the mechanic for an appropriate fuel for your vehicle. Premium fuel vehicles that make use of high octane tend to perform really well.

All About Imports, LLC (AAI) serves Denton, TX and the surrounding communities in the DFW area. We provide factory level service and regularly scheduled maintenance for Honda, Acura, Toyota, Lexus, Nissan and Infiniti vehicles. We also provide services for ALL other Asian imports. With honest, reliable and certified technicians you can rely on us for top notch car tune-up services. Call us today if your vehicle is having battery issues at (940) 566-2125.

From our auto repair facility in Denton, Texas we proudly provide quality car care to residents throughout North Texas and the surrounding communities including Dallas, Fort Worth, Flower Mound, Grapevine, The Colony, Lewisville, Krum, Sanger, Corinth, Argyle, Highland Village, Aubrey, Krugerville, Cross Roads, Corinth, Shady Shores, Lake Dallas and Little Elm, TX.